新闻资讯

ews center

  • 气动快速接头的安装注意事项
  • 本站编辑:杭州派跃威流体设备有限公司发布日期:2019-03-21 17:20 浏览次数:

 (1)胶管在移动或静止中,均不能过度弯曲,也不能在根部弯曲,至少要在其直径的1.5倍处开始弯曲;

     (2)胶管移动到极端位置时不得拉得太紧,应比较松弛;

     (3)尽量避免胶管的扭转变形;

     (4)胶管尽可能远离热辐射构件,必要时装隔热板;

青海快3     (5)应避免胶管外部损伤,如使用中同构件表面的长期摩擦等;

青海快3     (6)若胶管自重引起过分变形时,应有支托件。

201712061609204702.jpg

(1) The hose should not bend excessively or at the root, at least at 1。5 times its diameter, when it is moving or stationary。

(2) When the hose moves to the extreme position, it should not be pulled too tightly and should be relatively relaxed.

(3) Avoid torsional deformation of rubber hose as far as possible;

青海快3(4) Rubber hoses should be as far away from thermal radiation components as possible, and heat insulation panels should be used when necessary。

青海快3(5) External damage of the hose should be avoided, such as long-term friction with the surface of the component in use.

(6) If the weight of the hose causes excessive deformation, support shall be provided。


9号福彩网 青海快3 博九福彩网 9号福彩网app 9号福彩网注册 重庆快乐十分 新疆喜乐彩 重庆百变王牌 9号福彩网 青海快3